Ricoh B286 Service Manual page 436

SP6-xxx Peripherals
1 Transport JG door sensor ®
0 Cross fold door sensor ®
14 Door 2: Cross Folder (Not Used)
Bit Input
7 Not used
6 Not used
5 Not used
4 Transport JG door microswitch (F)
3 Cross horizontal microswitch 1
2 Cross horizontal microswitch 2
1 Inverter door microswitch
0 Inverter door microswitch
6118 Folder Output Check
Use this SP to switch on the motors, clutches, and solenoids of the Folder unit
B889 to test their operation.
Important: After switching on a motor, clutch, or solenoid, be sure to switch it off
after you finish your work.
1 Transport Motor: Fwd: Fan Folder
2 Bypass Feed Clutch: Fan Folder
3 Paper Entrance Clutch: Fan Folder
4 Output Junction Gate SOL: Fan Folder
5 Pre-Fold Motor: SE: Fwd: Fan Folder
6 Pre-Fold Motor: LE Fwd: Fan Folder
7 Pre-Fold Clutch: SE: Fan Folder
B286/B289
0: Close, 1: Open
0: Close, 1: Open
Status
---
---
---
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
0: Close, 1: Open
5-166 SM