Attach The Narrow Mylars To The Main Machine - Ricoh B286 Service Manual

Table (B854)

Attach the Narrow Mylars to the Main Machine

1. If the rear cover is attached to the main machine, remove it (" x 2).
th
2. Find the 5 space
3. Use a clean cloth, moist with a small quantity of alcohol, to clean this area and the
bottom edge of the cover.
4. Remove the tape from each end of one of the narrow mylars.
5. Attach one end to the top edge of the cover
The top edge must be flat and parallel to the edge of the cover. The right edge
!
of the mylar must be parallel to ridge
6. Attach the other end of the mylar to the bottom edge of the cover
7. Do this procedure again to attach the other narrow mylar to the right side of the cover.
8. Reattach the cover to the back of the main machine (" x 2).
B286/B289
from the left end of the rear cover.
1-52
.
.
.
SM