Ricoh B286 Service Manual page 389

Selection Country DFU
Used only for Embedded RC Gate-M to select a country name. Once the
number/country is selected, the following settings are checked:
! Access point telephone number
! Dial-up user name
150
! Modem parameters set for the country
[0 to 10/*/1]
*: 0: Japan, 1: USA, 3: Europe
0:Japan, 1:USA, 2:Canada, 3:UK, 4:Germany, 5:France, 6:Italy,
7:Netherlands, 8:Belgium, 9:Luxembourg, 10:Spain
Line Type Automatic Judgement DFU
Used only for Embedded RC Gate-M to determine whether the dial-up line is
for manual rotary or push-button tone dialing.
The status of the execution of this SP (dialing in progress, success,
!
151
failure) is written to SP5816-152.
! If the check succeeds, the number (dial or push number) written to
SP5816-153 can be used
! If the check succeeds, the number of the carrier line written to
SP816-154 can be used.
Line Type Judgement Result DFU
152
Used only for Embedded RC Gate-M to display the status of the execution of
SP5816-151 identify the type of line.
0 Success
1 Currently dialing
2 Line abnormal
3 Could not confirm external line carrier with automatic detection.
4 Line disconnected
5 Power supply insufficient
SM 5-119
SP5-xxx Mode
B286/B289