Ricoh B286 Service Manual page 310

SP1-xxx Feed
1935 Pressure FB Control Steps
This SP changes the stepped adjustments of SP1932 (Target Temp: Pressure
Roller) by using the sum of the settings of SP1932 (Target Temp: Pressure
Roller) +SP1935 (Press FB Control Steps) as the steps.
Example
! If the pressure roller temperature for SP1935-1 is 100
roller temperature is 195
! If the pressure roller temperature 120
SP1932+SP1935), the target hot roller temperature is 175
this is SP1931 – SP1934)
! If the setting is "0", the temperature settings of SP1931 do not change.
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
B286/B289
Pressure Feedback Control Steps
o
C ("100" is SP1932, "195" is SP1931).
o
C (= "100"+"20", this is
[0 to 50/20/5]
[0 to 50/25/5]
[0 to 50/30/5]
[0 to 50/20/5]
5-40
o
C, the target hot
o
C (="195"-"20",
SM