Ricoh B286 Service Manual page 420

SP5-xxx Mode
5856 Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE
1284) during a remote ROM update. This setting is reset to zero after the
machine is cycled off and on.
[0 to 1 / 0 / 1]
0: Not allowed
1: Allowed
5857 Save Debug Log
On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until
this feature is switched on.
1
[0 to 1/1]
0: OFF
1: ON
Target (2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the
event selected by SP5858 will be stored if an error is generated
2
[2 to 3 /1]
2: HDD
3: SD Card
Save to HDD
5
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
6
Specifies the decimal key number of the log to be written to the SD Card.
B286/B289 5-150 SM