Opening The Roll Feeder And Removing Shipping Material - Ricoh B286 Service Manual

Roll Feeder (B851/B852)
set it on the roll feeder.
2. Lift the main machine, and set its rubber feet [4] into the holes [5] on the top of the roll
feeder.
! With one person at each end of the main machine, use the two handles on
each end of the main machine to lift it.
3. Make sure that you put the rubber feet of the main machine into the holes on top of the
roll feeder.
4. Check the dehumidifier switch [6] of the roll feeder. Make sure that it is OFF. If it is ON,
set it to OFF.

Opening the Roll Feeder and Removing Shipping Material

! The drawer of the roll feeder is locked and cannot be opened until the main
machine is set on top of the roll feeder.
Do not try to open the drawer of the roll feeder until after you set the main machine
!
on top of the roll feeder.
1. Open the drawer [1] of the roll feeder.
2. Remove the spring lock plate [2] (" x 2).
3. Remove the roll paper holders [3] and cardboard packing [4].
! Roll Feeder B851 has 2 holders, and Roll Feeder B852 has 4 holders (shown
above).
4. Remove other tape or packing material in the roll feeder.
5. Remove the shipping lock plate [5] (" x 2).
B286/B289 1-30 SM