Ricoh B286 Service Manual page 408

SP5-xxx Mode
Delivery Server Setting
5845
Provides items for delivery server settings.
FTP Port No.
1
Sets the FTP port number used when image files are sent to the Scan Router
Server.
IP Address (Primary)
2
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Delivery Error Display Time Netfiles:
6 Use this setting to determine the length of time the prompt message is displayed
when a test error occurs during document transfer with the NetFile application
and an external device.
8 IP Address (Secondary)
Specifies the IP address assigned to the computer designated to function as the
secondary delivery server of Scan Router. This SP allows only the setting of the
IP address without reference to the DNS setting.
9 Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
B286/B289
[0 to 65535 / 3670 / 1]
Range: 000.000.000.000 to 255.255.255.255
[0 to 999 / 300 / 1]
Range: 000.000.000.000 to
255.255.255.255
[0 to 4/ 0 / 1]
5-138 SM