Ricoh B286 Service Manual page 419

Installation Date
5849
Displays or prints the installation date of the machine.
1 Display
2 Switch to Print
3 Total Counter
Bluetooth (Not Used)
5851
Sets the operation mode for the Bluetooth Unit. Press either key.
[0:Public] [1: Private]
5853 Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto
the hard disk so that these stamps can be used by the system. The customer will
not be able to use these stamps ("Confidential", "Secret", etc.) until this SP has
been executed.
Note:
! This SP must always be executed after the HDD has been reformatted or
replaced.
! Always switch the machine off and on after executing this SP.
SM
Displays the installation date. The installation date is set
automatically after test copies are done at the
installation site.
Determines whether the installation date or total count is
printed on the total counter printout.
[0 to 1/1]
0: No Print
1: Print
Displays the total count starting from the installation
date (SP5849-1).
5-149
SP5-xxx Mode
B286/B289