Attaching The Narrow Mylars To The Main Machine - Ricoh B286 Service Manual

Roll Feeder (B851/B852)

Attaching the Narrow Mylars to the Main Machine

th
1. Find the 5 space
2. Use a clean cloth, moistened with a small amount of alcohol, to clean this area and the
bottom edge of the cover.
3. Remove the tape from each end of one of the narrow mylars.
4. Attach one end to the top edge of the cover
! The top edge must be flat and parallel to the edge of the cover. The right edge
of the mylar must be parallel to ridge
5. Attach the other end of the mylar to the bottom edge of the cover
6. Do this procedure again to attach the other narrow mylar to the right side of the cover.
B286/B289
from the left end of the rear cover.
1-40
.
.
.
SM