Paper Cassette (B853)
1.
Open the drawer of the roll feeder.
2.
Remove the front cover [1] of the roll feeder (" x 3)
!
If you cannot see the screw on the left or right side of the front cover, push the
cutter [2] away from the top of the screw.
3.
Remove the knockout [3] (" x 2).
4.
If Roll 2 is installed, remove it.
5.
Remove the paper cassette from the paper cassette unit.
6.
Remove the rear plate of the roll feeder (" x 2).
7.
Put the cassette unit [1] in the roll feeder. The bosses must go through the holes in the
flanges of the cassette unit. Then, attach the cassette unit (" x 4).
B286/B289
1-46
SM