Ricoh B286 Service Manual page 444

SP6-xxx Peripherals
32 Fold Plate Halt: LEdge Corner Folding
This SP adjusts the length of time the paper feeds before the fan fold plate starts
to ascend when corner folding and fan folding have been selected for the job.
[-100 too +500/0/10 mm]
Note:
! This SP applies only if corner folding has also been selected for the job.
! An adjustment in the "+" direction lengthens the time, and an adjustment in
the "-" direction shortens the time.
33 Fold Plate Timing: LEdge Corner Folding
This SP adjusts the distance the paper feeds past the fan folder entrance sensor
(the sensor goes ON) before the fold plate starts to descend when corner folding
is also selected for the job.
[-70 to 70/0/0.1 mm]
Note:
This adjustment applies only after corner folding is also selected for the job.
!
! An adjustment in the "+" direction lengthens the distance, and an adjustment
in the "-" direction shortens the distance.
41 Fold Plate Movement: Paper Exit
This SP adjusts the distance for the fan fold plate to move in order to guide the
trailing edge of the last fold out of the fan folder unit.
[-200 to +200/0/1 mm]
Note:
! An adjustment of 1 step is equivalent to 0.191 mm.
An adjustment in the "+" direction moves the fan fold plates closer to the fan
!
fold rollers, and an adjustment in the "-" direction moves the plate away from
the fan fold rollers.
B286/B289 5-174 SM