Ricoh B286 Service Manual page 275

8. To update an application:
! Touch the name of the application that needs to be updated. The name of the
application changes to reverse black and the [Update#] key appears at the lower
right corner of the screen.
! Touch [Update#] to start the update procedure.
! Follow the instructions on the operation panel to complete the procedure.
! Never switch the machine off while a firmware update is in progress.
9. When the update is finished:
! Switch the machine off.
! Remove the SD card from Slot 3.
! Reattach the SD card slot cover.
Note:
More than one application can be selected for update, but there are restrictions.
!
! Controller applications and the operation panel update must be done separately. If you
select a controller application and the operation panel for update, the machine will
display a message:
Caution!
Controller applications and Op Panel must be installed
separately.
SM 5-5
Firmware Update
B286/B289