Main Machine Installation (B286)
into the holes.
18. Lift each plate and let it fall, to make sure that they move smoothly on the hinges.
19. Reattach the manual feed table.
20. Reattach the left and right covers.
!
The flat-head screw must be attached at the rear side of each cover.
21. Close the upper unit.
Leveling the Main Machine and Attaching Leg Covers
1.
Open the toner hopper cover [1].
2.
Set a level [2] on the plate [3] of the development unit.
3.
Set the shoes
B286/B289
, , ,
under the main machine.
1-14
SM