Fusing; Pressure Spring Adjustment - Ricoh B286 Service Manual

Fusing

3.7 FUSING

3.7.1 PRESSURE SPRING ADJUSTMENT

1. Open the exit cover and exit unit together.
2. To adjust the pressure, disconnect the spring [A] and connect it to a different hole.
! Center: Standard tension, standard pressure.
! Left: Less tension, less pressure. Set to this position to decrease wrinkling
! Right: More tension, more pressure. Can give better fusing with thick paper.
! Wrinkling occurs more frequently with some types of paper or film. Adjust the
tension of the spring only when necessary.
B286/B289 3-42 SM