Installation Procedure; Setting The Main Machine On The Table - Ricoh B286 Service Manual

1.6.2 INSTALLATION PROCEDURE

! Confirm that the machine is switched off and that the power cord is disconnected
from the power source before doing this procedure.

Setting the Main Machine on the Table

! The main machine weighs 107 kg (235 lb.).
! There are two handles in recesses on each side of the main machine. To prevent
injury or damage to the main machine, always use these handles [1] to lift the main
machine.
! Two or more service technicians are necessary to lift the main machine and set it
on the table.
1. Lift the main machine, and set its rubber feet [2] into the holes [3] on the top of the
table [4].
! With one person at each end of the main machine, use the two handles on
each end of the main machine to lift it.
2. Make sure that you put the rubber feet of the main machine into the holes on top of the
table.
SM 1-49
Table (B854)
B286/B289