Scanner
1.
Read the values for SP4972 that are printed on the label attached to the CIS
replacement unit.
!
The label is attached to replacement CIS units only.
2.
Do SP4972 and input the 8 values.
3.
Do SP2902-2 and print Pattern 11 to check the CIS.
4.
Adjust if necessary. (See section 311.2 "CIS Adjustment with SP Codes")
3.2.5 SMDB, VDB
1.
Side covers (See section 3.1.2 "Side Covers.")
2.
Manual feed table, original feed sensor cover (See section 3.1.10 "Manual Feed Table,
Original Feed Sensor Cover.")
VDB [A] (FFC x 6, # x 4, " x2, Standoff x2)
3.
B286/B289
3-14
SM