Entering The Cut Length Adjustment; Setting Paper Sizes/Types For The Tray; St Roll), Tray 2 (2 Nd Roll) - Ricoh B286 Service Manual

Roll Feeder (B851/B852)
4. Do a test print to confirm that the paper exits the main machine straightly and smoothly
between the guide plates.

Entering the Cut Length Adjustment

1. Do the settings for SP1920. These are the cut length SP settings for the rolls (there are
two settings for each roll).
2. Check the label on the right side of the roll feeder drawer. Do the settings written on the
label.
Roll SP No.
Roll 1 1920-111
Roll 1 1920-115
Roll 2 1920-211
Roll 2 1920-215
3. Switch the main power switch off, then switch it on again.

Setting Paper Sizes/Types for the Tray 1 (1

1. Push [User Tools]> "System Settings"> "Tray Paper Settings"> "Tray Paper Size: Tray
1", "Tray Paper Size: Tray 2."
2. Select the paper size for Tray 1 and Tray 2.
3. Push "Next"> "Paper Type: Tray 1", "Paper Type: Tray2
4. Select the paper type for Tray 1 and Tray 2.
B286/B289
Cut Length Adjustment: 1
Cut Length Adjustment: 1
Cut Length Adjustment: 2
Cut Length Adjustment: 2
1-44
Name
st
Roll:297 mm:Plain Paper
st
Roll:1189 mm:Plain Paper
nd
Roll:297 mm:Plain Paper
nd
Roll:1189 mm:Plain Paper
st
Roll), Tray 2 (2
nd
Roll)
SM