Attaching The Stopper Brackets - Ricoh B286 Service Manual

Table (B854)

Attaching the Stopper Brackets

This stopper bracket is only for machines in North America that use inch paper
!
sizes.
1. Remove the stoppers [1] (% x 2 each).
2. Use a clean cloth soaked in alcohol to clean the surfaces [2] where the stopper
brackets [3] will be attached.
3. Remove the double-sided tape [4] from the rear of each bracket.
4. Install each bracket and stopper on the arms.
5. Lock each stopper in the correct position (% x 2 each).
Table Accessories
B286/B289 1-54 SM