Ricoh B286 Service Manual page 309

1934 Lower Limit Temp: Hot Roller
This SP sets the minimum difference in temperature allowed between the
actual temperature and the target temperature of the hot roller.
Important:
! Modes "1" to "5" below refer to the paper and thickness settings selected in
User Tools (see "Paper Thickness Default Selection" in this section). In
order for this SP to operate, SP9952 1 must be at "0" (default) so that the
machine can acquire temperature readings (feedback) from the pressure
roller thermistors.
The default setting of SP9952 should never be adjusted in the field.
!
1 Plain: Mode1
2 Plain: Mode2
3 Plain: Mode3
4 Plain: Mode4
5 Plain: Mode5
6 Trans.: Mode1
7 Trans.: Mode2
8 Trans.: Mode3
9 Trans.: Mode4
10 Trans.: Mode5
11 Film: Mode1
12 Film: Mode2
13 Film: Mode3
14 Film: Mode4
15 Film: Mode5
16 Plain: Low Temp Mode
SM
[0 to 50/20/5]
[0 to 50/15/5]
[0 to 50/25/5]
[0 to 50/20/5]
[0 to 50/0/5]
5-39
SP1-xxx Feed
B286/B289