Setting The Length Of Copy Paper Cut; Rotate Copy - Ricoh aficio 480w Operating Instructions Manual

Copying
Manual paper select
A A A A
Select the paper tray or paper by-
pass.
The selected tray key is highlighted.
❖ ❖ ❖ ❖ When the lower tray (paper roll
2
tray) is installed
❖ ❖ ❖ ❖ When the cut paper trays are
installed
-

- Rotate Copy

- -
If the original's width is different to
that of the paper set in the paper roll
tray, or the original's orientation ( K
or L ) is different to that of the paper
loaded in the cut paper trays, this
function rotates the original image by
90 degrees, to fit it onto the copy pa-
per.
30
Note
❒ This function works when Auto
Paper Select is selected. See p.29
"Selecting Copy Paper".
❒ The default for Auto Tray Switch-
ing is With image rotation. You
cannot use Rotate Copy if this set-
ting is changed to Without image
rotation or Off. See p.84 "Auto
Tray Switching".
Setting the Length of Copy
Paper Cut
Preparation
The following paper cut methods
are available.
❖ ❖ ❖ ❖ Synchro Cut
Cuts the paper at the same
length as the original.
If the copy is enlarged or re-
duced, the machine calculates
the appropriate length for the
magnification ratio and cuts the
paper.
❖ ❖ ❖ ❖ Preset Cut
Cuts the paper at a preset size,
regardless of the size of the orig-
inal. You can use this to copy
different sized originals to the
same size.
❖ ❖ ❖ ❖ Variable Cut
Cuts the paper to the size en-
tered.
Important
❒ Except for Synchro Cut, the paper
is cut regardless of the size of the
original.
GCROTA0E