Troubleshooting; Jam Display; List Of Jam Display; Jam Display Resetting Procedure - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011

TROUBLESHOOTING

16. JAM DISPLAY

• When a paper misfeed occurs, the printer shows the corresponding paper misfeed status
by means of the Error indicator on the control panel or LCD display.

16.1 List of JAM display

Display
PAPER MISFEED
OPEN RIGHT DOOR
PAPER MISFEED
OPEN TRANSPORT DOOR
FUSER JAM
OPEN RIGHT DOOR
TRANSFER ROLLER JAM
OPEN TRANSPORT DOOR
VERTICAL TRANS JAM
OPEN RIGHT DOOR
DUPLEX LOWER JAM
OPEN RIGHT DOOR
DUPLEX UPPER JAM
OPEN RIGHT DOOR
MP TRAY JAM
OPEN RIGHT DOOR
OUTPUT JAM
OPEN RIGHT DOOR
ORIGINAL DOC. JAM
OPEN DOC. FEED COVER
(PRESS START KEY)
Controller JAM
Service Call: F001
16.1.1

JAM display resetting procedure

• Open the corresponding door, clear the sheet of paper misfed, and close the door.
• Turn OFF the power switch and then ON.
Misfeed Location
Tray2 paper feed section
Tray3 paper feed section
Fusing section
Transfer section
Tray3 vertical transport
section
Duplex paper feed section Right door
Duplex paper transport
section
Tray1 paper feed section
Exit section
Document feeding section Top cover
Controller JAM
16. JAM DISPLAY
Misfeed processing
location
Tray2 right side P.271
cover
Tray3 right side P.272
cover
Right door P.273
Fuser unit
Right door P.274
Right door P.275
P.276
Right door P.277
Manual feed tray P.278
Right door
Right door P.273
P.279
- P.280
A2YFF4E001DA
Action
269