Fax Counter; Scan Counter; Tray Counter; Paper Size Counter - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011
Q. MONO PRINT L
• Count the output number of faces of the printing large size paper by the mono print.
R. FAX PRINT L
• Count the output number of faces of the printing large size paper by the fax print.
• However, it does not count to the output of the printing paper which users cannot direct,
such as the test printing and the report output in the service mode, the protocol report
directed in the service mode.
• Do not count to a blank paper at the time of ejecting a blank paper by the size error.
13.5.2

FAX COUNTER

A. Use
• Displays the number of FAX printed pages produced.
• When checking the number of FAX printed pages produced.
TX JOB: Counter the number of transmission job.
RX JOB: Counter the number of reception job.
13.5.3

SCAN COUNTER

A. Use
• To display the count of the scan counter.
• When checking the number of scans made.
IR: Count one when one time of IR action completed.
ADF (SINGLE): Count the number of sheet of ADF (single) scanning.
ADF (DUPLEX): Count the number of sheet of ADF (Duplex) scanning.
13.5.4

TRAY COUNTER

A. Use
• Displays the number of sheets of paper used for each tray.
• The element to count is as follows.
13.5.5

PAPER SIZE COUNTER

A. Use
• Displays the number of sheets of paper used for each size and type.
• A paper size counter is as follows.
13.5.6

PAPER TYPE COUNTER

A. Use
• Displays the number of sheets of paper used for each paper type.
• A paper type counter is as follows.
PLAIN PAPER, RECYCLED, THICK, THICK2, GLOSSY, GLOSSY2, SINGLE SIDE.,
SPECIAL, ENVELOPE, LETTERHEAD, POSTCARD, LABEL
TRAY1, TRAY2, TRAY3
A4, B5, A5, LEGAL, LETTER, OTHERS
13. SERVICE MODE
151