Konica Minolta bizhub C25 Service Manual page 306

Field Service Ver. 1.1 May 2011
Bit
Designation
No.
32 Extend field
"0"= Invalid
33
"1"= Field not valid capability
"0"= Invalid
34
"1"= Multiple selective polling capability
"0"= Invalid
35 "1"= Polling sub address transmission (DTC) by Polled Sub
Address (DIS)/PSA
"0"= Invalid
36
"1"= T.43 coding
"0"= Invalid
37
"1"= Plane interleave
38 Set to "0"
39 Set to "0"
40 Extend field
"0"= Invalid
41
"1"= R8 x 15.4 lines/mm
"0"= Invalid
42
"1"= 300 x 300 pels/25.4 mm
"0"= Invalid
43
"1"= R16 x 15.4 lines/mm and/or 400 x 400 pels/25.4 mm
"0"= Invalid
44
"1"= Inch based resolution preferred
"0"= Invalid
45
"1"= Metric based resolution preferred
Minimum scan line
46 time capability for
higher resolutions.
"0"= Invalid
47 "1"= Selective polling (DIS)/ Selective polling transmission
(DTC)
48 Extend field
"0"= Invalid
49
"1"= Sub Addressing capability
"0"= Invalid
50 "1"= Password/ Sender Identification capability (DIS)/
Password transmission (DTC)
"0"= Invalid
51
"1"= Ready to transmit a data file (polling)
52 Set to "0"
"0"= Invalid
53
"1"= Binary File Transfer (BFT)
"0"= Invalid
54
"1"= Document Transfer Mode (DTM)
DIS/DTC
"0"= Without
"1"= With
"0"= Without
"1"= With
"0": T 15.4 = T 7.7
"1": T 15.4 = 1/2 T 7.7
0: Without
1: With
15. FAX PROTOCOLS
DCS
Set to "0"
Set to "0"
Resolution type selection
"0"= metric based resolution
"1"= inch based resolution
Do not care
Do not care
Set to "0"
"0"= Invalid
"1"= Sub Addressing transmission
"0"= Invalid
"1"= Sender Identification transmis-
sion
Set to "0"
265