Konica Minolta bizhub C25 Service Manual page 72

Field Service Ver. 1.1 May 2011
4. The result of the firmware transfer is displayed. Click the [Exit].
5. If the firmware was successfully updated, the printer will automatically restart.
6. Print [CONFIGURATION PAGE] to confirm the PS/PCL Firmware Version.
See P.154
<If spooling of the data fails>
NOTE
• If spooling fails, data may remain in the printer spooler. Delete this data, and then
try again.
1. If spooling of the data fails, the following message appears.
2. Click [OK].
6. FIRMWARE UPGRADE
A011F2E560DA
A011F2E561DA
31