Ps/Pcl; Print Menu - Maintenance Info - Konica Minolta bizhub C25 Service Manual

13. SERVICE MODE

13.14 PS/PCL

13.14.1

PRINT MENU - MAINTENANCE INFO

A. Use
• To check the maintenance information.
• The items which can be checked are as follows.
[Device Caution Information]: Process caution information.
[Count (total)]: Counter value for each color.
[Coverage (total)]: Coverage rate for each color
[Replace count (total)]: Number of times IU, TC, transfer belt, transfer roller, and fuser
unit have been replaced.
[Imaging Unit Information]: Information concerning the print unit.
[Toner Cartridge Information]: Information concerning the toner cartridge.
B. Procedure
1. Call the service mode to the display.
2. Select [PS/PCL]  [PRINT MENU]  [MAINTENANCE INFO] and press the Select
key.
3. Select [PRINT] and press the Select key.
(1) How to read process caution information
• Convert the numerical value of the hexadecimal number printed on "PROCESS CAU-
TION INFORMATION" in [Maintenance Information] into the binary number, it compares
with the allocation of each BIT, and the caution status is confirmed.
ex. When process caution information is displayed as 0x0020.
1. Convert four end digits "0020" of 0x0020 into the binary number (14 digits).
2. The BIT number is allocated in converted value "00000000100000."
(BIT0 to BIT13 is sequentially allocated from the first digit.)
0
0 0 0 0 0 0 0 0 1 0 0 0 0 0
BIT13 12
3. In this case, BIT No. "5" corresponds to "1". From the "PROCESS CAUTION INFOR-
MATION", IDC sensor (front) malfunction can be detected.
170
0
11 10 9 8 7
Field Service Ver. 1.1 May 2011
2
6 5 4 3 2
0
1 BIT0
A011F3C506DA