Field Service Ver. 1.1 May 2011
18.4.16
0650: Scanner home sensor abnormalities
Scanner motor (M101)
Print control board (PRCB)
Step
1
Check to see if the lock lever of the Scan-
ner unit is unlocked and unlock the lock
lever if it is locked.
2
Check the M101 connector for proper con-
nection and correct as necessary.
3
Check M101 for proper drive coupling and
correct as necessary.
4
Check the PRCB connector for proper con-
nection and correct as necessary.
5
M101 operation check.
6
Change PRCB.
7
Change DCPU.
18.4.17
0F52: Toner level sensor/Y malfunction
18.4.18
0F53: Toner level sensor/M malfunction
18.4.19
0F54: Toner level sensor/C malfunction
18.4.20
0F55: Toner level sensor/K malfunction
Toner level sensor/Y (PS13)
Toner level sensor/M (PS14)
Toner level sensor/C (PS15)
Toner level sensor/K (PS16)
Step
1
Check the connector between each sen-
sor-PRCB PJ21 for proper connection and
correct as necessary.
2
Replace the toner level sensor of the corre-
sponding color.
3
Change PRCB.
Relevant electrical parts
Action
Relevant electrical parts
Action
18. MALFUNCTION CODE
DC power supply (DCPU)
WIRING DIAGRAM
Control signal
-
-
-
-
MFPB/1 P106
-
-
Printer control board (PRCB)
WIRING DIAGRAM
Control signal
-
-
-
Location (electri-
cal component)
-
-
-
-
C-1
-
-
Location (electri-
cal component)
-
-
-
293