Lower Feeder Unit Pf-P09 - Konica Minolta bizhub C25 Service Manual

23. IC protector
B. DC power supply
ICP
Symbol
No.
- DC power supply circuit
FU101
- Heater circuit
FU191
*1: This is an error that occurs when the power switch is turned ON. If the IC protector trips
after the power switch is turned ON, another error may occur.
23.2.2

Lower feeder unit PF-P09

A. PC control board
ICP
Symbol
No.
ICP1 CL1 Media feed clutch
ICP2 CL2 Conveyance clutch
382
Target part name
DC power supply does not
supply power.
The heater does not turn
ON.
Target part name
No function
No function
Field Service Ver. 1.1 May 2011
When ICP trips
Symptom in each load
Power switch is not turned
When ICP trips
Symptom in each load
Trouble code and others
ON.
0500 *1
Trouble code and others
Misfeed at tray 3 paper
feed section
Misfeed at tray 3 vertical
conveyance section