Troubleshooting; Jam Display; List Of Jam Display; Misfeed Display Resetting Procedure - Konica Minolta d-Color MF3000 PF-P08 Service Manual

Field Service Ver. 1.1 Jun. 2010

TROUBLESHOOTING

12. JAM DISPLAY

• When the paper jam occurred, the message is displayed on the control panel.

12.1 List of JAM display

Misfeed type
Fusing/paper exit section
Transfer section
Conveyance section
Duplex section
Tray 1
Tray 2
Tray 3 *1
Tray 4 *1
ADF section
Controller JAM
Service Call: F001
*1: Only when the optional paper feeder unit is installed.
12.1.1

Misfeed display resetting procedure

• Open the corresponding door, clear the sheet of paper misfed, and close the door.
• Turn OFF the power switch and then ON.
Misfeed location
• Fusing/paper exit section
• Transfer section
• Vertical conveyance section
• Duplex pre-registration sec-
tion
• Duplex paper conveyance
section
• Tray 1 (manual bypass tray)
paper feed section
• Tray 2 paper feed section
• Tray 3 paper feed section
• Vertical conveyance section
• Tray 4 paper feed section
• Vertical conveyance section
• ADF paper feed section
• ADF conveyance section
• ADF paper exit section
• Controller JAM
12. JAM DISPLAY
Misfeed processing
location
• Right door P.191
• Fuser unit
• Right door P.192
• Right door P.196
• Tray 3 right door
• Duplex door P.198
P.197
• Manual bypass tray P.193
• Right door
• Tray 2 P.194
• Right door
• Tray 3 P.195
P.196
• Tray 3 right door
• Tray 3 P.195
P.196
• Tray 4 right door
• ADF feed cover P.199
- P.200
A121F4E501DA
Action
189