Konica Minolta bizhub C25 Service Manual page 99

7. OTHER MAINTENANCE ITEM
[1]
[1]
[1]
[1]
[1]
58
[3]
[2]
A2YFF2C075DA
[1]
A2YFF2C076DA
[2]
[3]
A2YFF2C077DA
[2]
A2YFF2C150DA
Field Service Ver. 1.1 May 2011
8. Disconnect 18 connectors [1] from
the printer control board, and remove
them from three wire saddles [2].
NOTE
• Disconnect all connectors located
between the top left connector PJ12
and the bottom right connector
PJ25.
9. Disconnect flat cable [3].
10. Remove eight screws [1]
11. Remove three screws [1], and
remove the bracket [2].
12. Remove two bands [3] from the
bracket.
13. Remove the wire saddle [1] from the
bracket.
14. Remove the screw [2]