Konica Minolta bizhub C25 Service Manual page 440

Field Service Ver. 1.1 May 2011
MAINTENANCE
2. PERIODICAL MAINTENANCE PROCEDURE
2.1 Feed section
2.1.1 Replacing the tray3 feed roller
A. Periodically replaced parts/cycle
• Tray3 feed roller: Every 300,000 counts
B. Procedure
1. Slide out tray3.
[1]
2. PERIODICAL MAINTENANCE PROCEDURE
[4]
[2] [3] [2]
A0WJF2C051DA
2. Lock the media lifting metal plate [1].
3. Remove two C-rings [2] and the
bearing [3] at the front, and remove
the tray3 feed roller [4].
3