Konica Minolta bizhub C25 Service Manual page 120

Field Service Ver. 1.1 May 2011
[5]
[3]
[1]
22. To reinstall, reverse the order of removal.
NOTE
• While reinstalling the holder, the gear needs to be pushed.
• After reinstallation, remove the tape attached in step 20.
[4]
[2]
[1]
A2YFF2C103DA
A2YFF2C104DA
7. OTHER MAINTENANCE ITEM
20. Remove the E-ring [1] and bushing
[2], and remove the holder [3].
NOTE
• Before removing the holder [3],
attach tape or similar material [4] to
the section shown in the illustration
to prevent the shaft from falling
down and being lost.
• While removing the holder [3], the
gear [5] needs to be pushed in the
direction of the arrow.
21. Remove the loop detection clutch [1].
79