Coding Scheme; Toner Empty Report - Konica Minolta bizhub C25 Service Manual

13. SERVICE MODE
13.3.9

CODING SCHEME

A. Use
• Select compression method in TX/RX mode.
MMR: A compression method.
MR: A compression method.
MH: The simplest compression method.
JBIG: The most complex compression method that generates the smallest code than
any of following ones.
B. Procedure
• The default setting is JBIG.
MMR
13.3.10

TONER EMPTY REPORT

A. Use
• Select to generate a report to a specific destination when toner empty status occurs in
the engine.
ON: Generate a report to report destination.
OFF: Not to generate report.
B. Procedure
• The default setting is OFF.
ON
• If "ON" is selected, select generate report and send to remote side when toner runs out.
• Enter the telephone number for which the report is to be produced.
• Fax number specifications: An up-to-20-digit number that may consist of [0-9], [*], [#],
[pause], and [space]. (0-9, #, *, pause, _)
• The report will generate after 20 minutes, 24 hours, 48 hours, or 72 hours after the event
has occurred or until the condition is gone.
C. Toner empty report (example)
NAME:ABC 123
TEL:1234567
DATE: Jun 10.2008 15:12
The Fax's following conditions were appears, the machine may be can not work correctly, the Fax
already send a report to your dealer automatically. They will contact with you soon.
Toner Cartridge Cyan
Toner Cartridge Magenta : Full
Toner Cartridge Yellow
Toner Cartridge Black
132
MR
SERVICE REPORT
: Empty
: Full
: Full
Field Service Ver. 1.1 May 2011
MH "JBIG"
"OFF"
A0FDF3C500DA