Ph Unit; Fusing Unit - Konica Minolta bizhub C25 Service Manual

7. OTHER MAINTENANCE ITEM
F. Precautions during setup or transportation
• Whenever mounting an option on the machine, be attentive to the motion of the
fellow worker of the joint work.
The fellow worker may be injured with his or her finger or hand pinched between
the machine and the option.
• When mounting an option on the machine, be careful about the clearance between
the machine and the option.
You may be injured with your finger or hand pinched between the machine and the
option.
• Do not leave the machine unattended during transportation, installation, and
inspection of the machine. If it is to be unavoidably left unattended, face protru-
sions toward the wall or take other necessary risk reducing action.
The user may stumble over a protrusion of the machine or be caught by a cable,
falling to the floor or being injured.
7.1.1

PH unit

A. Reason for prohibition
• The laser runs inside the PH unit. Opening the cover may cause dust to enter and inter-
rupt the laser. Do no remove any screw which may disassemble the PH unit.
7.1.2

Fusing unit

A. Reason for prohibition
• Inner part of the fusing unit and the position of the fusing roller are adjusted prior to ship-
ping. Do not remove any screw which may disassemble the fusing unit.
40
Field Service Ver. 1.1 May 2011