Cis Module - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011
10. To reinstall, reverse the order of removal.
7.3.35

CIS module

1. Remove the rear cover.
See P.43
2. Remove the ADF.
See P.98
[2] [1]
1.1
[1]
[1]
[1]
A2YFF2C114DA
[1]
[1]
A2YFF2C115DA
A2YFF2C120DA
7. OTHER MAINTENANCE ITEM
3. Peel off the label [1].
NOTE
• After reinstalling the original glass,
attach the label (Parts No.: A121
9447 ##) again.
4. Remove 12 screws [1], and remove
the original glass [2].
NOTE
• During installation of the original
glass, use care not to allow dust or
dirt to enter the machine. Clean any
dust or dirt that may have entered
before attempting to install the orig-
inal glass.
5. While releasing the stopper, remove
the belt [1].
95
1.1