Dc Power Supply (Dcpu) - Konica Minolta bizhub C25 Service Manual

Field Service Ver. 1.1 May 2011
7.3.13

DC power supply (DCPU)

• Note that in the event of DC power supply failure, it can take long before
voltage drops even after turning OFF the power switch.
To avoid electrical shock, after turning OFF the power switch, do not
touch the DC power supply for 9 minutes.
1. Remove the fuser unit.
See P.19
2. Remove the waste toner bottle.
See P.14
3. Remove the rear cover.
See P.43
4. Remove the left cover.
See P.43
5. Remove the ADF.
See P.98
6. Remove the scanner unit.
See P.96
7. Remove the front right cover.
See P.45
8. Remove the upper cover.
See P.49
[3]
[2]
CAUTION
9. Disconnect the connector [1].
[1]
10. Remove the screw [2], and remove
11. Disconnect two connectors [4].
[4]
A2YFF2C068DA
7. OTHER MAINTENANCE ITEM
the exit drive assy [3].
55