4. PERIODICAL MAINTENANCE PROCEDURE
[1]
[2]
[1]
22
[2]
A0VDF2C004DA
[3]
[1]
A0VDF2C005DA
A0VDF2C547DA
Field Service Ver. 1.1 May 2011
NOTE
• When reinstalling the tray 1 feed
roller assy, the stopper [1] must be
located under the shaft [2] as
shown in the illustration.
6. Remove the E-ring [1] and mecha-
nism clutch [2], and remove the tray1
feed roller [3].
7. To reinstall, reverse the order of
removal.
NOTE
• When reinstalling the feed roller [1],
make sure that it is mounted in the
direction shown in the illustration
on the left.