201-202 paper jams
If the jammed paper is visible in the standard exit bin, then firmly grasp the paper on each side, and then gently
pull it out.
Note: Make sure all paper fragments are removed.
Paper jam in the fuser
Open door A by lifting the release latch and lowering the door.
1.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching.
2.
Pull the green lever down.
Firmly grasp the jammed paper on each side, and then gently pull it out.
3.
Warning: Do not touch the center of the fuser unit. Doing so will damage the fuser.
Note: Make sure all paper fragments are removed.
2
1
5058-030
Previous
Go Back
Diagnostic aids
3-29
Next