Remove the bracket from the machine.
4.
5.
Release the hooks (B) securing the sensor (bridge top door interlock) to the bracket.
Remove the sensor (bridge top door interlock).
6.
Sensor (decurler cam HP) removal
Remove the bridge unit assembly. See
1.
Remove the bridge decurler rear cover. See
2.
page
4-247.
3.
Release the hook (A) securing the sensor flag to the machine.
"Bridge unit assembly removal" on page
"Sensor (decurler cover interlock) removal" on
5058-030
4-232.
Repair information
4-245
Previous
Next
Go Back