Lexmark C950 Service Manual page 714

5058-030
Move the stacker bin (B) to its lowest position.
4.
Note: Make sure the stacker bin is at the lowest position before continuing.
Remove the two screws securing the bin bracket (C) to the right carriage bracket (D).
5.
Remove the spring (E) from the right carriage bracket (D).
6.
Remove the screw securing the upper belt clamp (F) to the right carriage bracket (D).
7.
8. Remove the upper belt clamp (F).
Remove the right carriage bracket (D) with the finisher right carriage belt assembly (G) from the finisher.
9.
Release the hook securing the finisher right carriage belt assembly (G) to the lower belt clamp (H).
10.
Remove the finisher right carriage belt assembly (G).
11.
Service Manual
4-286
A
B
Rear
Previous
Next
Go Back