Lexmark C950 Service Manual page 701

Move the lower pinch guide assembly to the right.
6.
7. Position the buffer diverter gate (B) using your finger to its upper-most position.
Front
Use a prying tool to remove the e-clip securing the buffer roll assembly (C) to the front of the finisher.
8.
9. Remove the 6 mm bushing (D).
Front
10. Remove the finisher diverter gate solenoid. See
page 4-275.
Loosen the two screws securing the belt tensioner bracket (E) to the finisher and move it downward, as
11.
shown.
B
A
E-clip
C
D
"Finisher diverter gate solenoid removal" on
5058-030
B
Repair information
Previous
Next
Go Back
4-273