Lexmark C950 Service Manual page 597

Rotate the transfer belt lever counterclockwise to the unlock position.
3.
4. Open the printhead retract door.
Warning: After the photoconductor units are removed, ensure that they are properly covered so that they are
not exposed to light.
Remove the four photoconductor units.
5.
Remove the transfer belt lever. See
6.
Open the printer left duplex door assembly.
7.
Remove the fuser. See
8.
9. Remove the e-clip (A) securing the rear plastic support strap to the printer left duplex door assembly.
"Transfer belt lever removal" on page
"Fuser assembly removal" on page
4-174.
4-78.
Repair information
5058-030
Previous
Next
Go Back
4-169