Buffer Pinch Guide Assembly Removal - Lexmark C950 Service Manual

Remove the two screws securing the buffer diverter gate solenoid to the finisher.
5.
6. Remove the buffer diverter gate solenoid.
Note: The link (B) may remain inserted into the finisher.
7. Remove the link.
Note: When the link is removed, the buffer diverter gate may become detached. See
gate removal" on page

Buffer pinch guide assembly removal

Remove the finisher front door assembly. See
1.
Remove the rear upper cover. See
2.
Remove the rear lower cover. See
3.
Remove the stapler unit frame. See
4.
5. Lower the buffer pinch guide assembly (A) as far as it will go.
B
B
4-265.
"Rear upper cover removal" on page
"Upper media bin front cover removal" on page
"Stapler unit frame removal" on page
A
Rear
"Finisher front door assembly removal" on page
5058-030
Clamp
Connector
"Buffer diverter
4-276.
4-309.
4-353.
4-342.
Repair information
4-267
Previous
Next
Go Back