Bridge decurler right cover removal
Remove the bridge unit assembly. See
1.
2.
Remove the two screws (A) securing the bridge decurler right cover to the machine.
Remove the bridge decurler right cover.
3.
Bridge decurler top cover removal
1.
Remove the bridge unit assembly. See
Remove the bridge decurler rear cover. See
2.
Raise the bridge top door to its uppermost position.
3.
"Bridge unit assembly removal" on page
"Bridge unit assembly removal" on page
"Bridge decurler rear cover removal" on page
5058-030
4-232.
4-232.
4-228.
Repair information
4-229
Previous
Next
Go Back