Sensor (Booklet Compiler Media Present) Static Jam - Lexmark C950 Service Manual

Step Action and questions
Check the booklet unit interface
5
contact for proper connection.
Is the above component
properly connected?
Check the booklet controller card
6
assembly for proper connection.
Is the above component
properly connected?
POR the machine.
7
Does the error continue?

492.01 Sensor (booklet compiler media present) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (booklet
2
compiler media entrance) for
proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
3. Touch Sensor (booklet
compiler media present).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (booklet
3
compiler media entrance) for
proper connection.
Is the above component
properly connected?
Check the booklet controller card
4
assembly for proper connection.
Is the above component
properly connected?
Yes
Go to Step 6.
Replace the booklet controller
card assembly).
Go to
"Booklet controller card
assembly removal" on
page 4-250.
Go to step 7.
Replace the finisher PCBA.
Go to
"Finisher PCBA removal"
on page 4-281.
Yes
Go to step 2.
Go to Step 4.
Replace the sensor (booklet
compiler media entrance). Go to
"Sensor (booklet compiler
media entrance) removal" on
page 4-311.
Replace the booklet controller
card assembly).
Go to
"Booklet controller card
assembly removal" on
page 4-250.
If the error remains, then go to
step 5.
5058-030
No
Replace the booklet unit interface
contact.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to Step 3.
Replace connections.
Replace the connections.
Diagnostic information
Previous
Next
Go Back
2-203