Lexmark C950 Service Manual page 463

Remove the eight screws (B) securing the PCBA door to the machine.
3.
Release the two clamps (C) to release the harness.
4.
Swing the PCBA door open.
5.
Note: The cables do not have to be removed from the main power GFI interface to remove this part. Just pull the
main power GFI interface out of the machine and swing it out of the way.
Remove the main power GFI interface, or just move it so that you can get to the charge roll HVPS cooling
6.
fan. See the
"Main power GFI interface removal" on page
Disconnect the cable (D) from the charge roll HVPS cooling fan.
7.
4-113.
Repair information
5058-030
Previous
Next
Go Back
4-35