Sensor (Booklet Media Entrance) Removal - Lexmark C950 Service Manual

Disconnect the connector from the sensor (booklet knife HP and booklet knife folding).
5.
6. Remove sensor (booklet knife HP) (A).

Sensor (booklet media entrance) removal

1. Remove the booklet unit chassis. See
Disconnect the connectors from the sensor (booklet media entrace) (A).
2.
Remove the screw securing the sensor (booklet media entrace) bracket from the pinch roll frame.
3.
Remove the screw securing the sensor (booklet media entrace) (A) from the bracket.
4.
Remove sensor (booklet media entrace) (A).
5.
Connector
A
"Booklet unit chassis removal" on page
A
Right
Left
Connector
5058-030
4-263.
Repair information
4-315
Previous
Next
Go Back