Lexmark C950 Service Manual page 70

5058-030
2xx service error codes
Error code
203.03
Paper jam
203.05
Paper jam
230.01
Paper jam
231.03
Paper jam
232.03
Paper jam
242.01
Paper jam
242.03
Paper jam
242.06
Paper jam
242.56
Paper jam
243.01
Paper jam
Service Manual
2-22
Description
Sensor (upper redrive) late jam
Sensor (upper redrive) lag jam
Sensor (duplex wait) static jam.
Sensor (duplex wait) late jam
Sensor (registration) late jam (Duplex
direct)
Sensor (tray 2 feed out) static jam
Sensor (tray 2 feed out) late jam
Sensor (tray 2 feed out) failed to pick
jam
Sensor (tray 2 feed out) late jam
80K interval for feed rollers exceeded
in tray 2.
Sensor (tray 3 feed out) static jam
Action
The media is late reaching the sensor
(upper redrive) within the specified time
after reaching the sensor (fuser exit).
Go to
"203.03 Sensor (upper redrive)
late jam" on page 2-99.
The media reached the sensor (upper
redrive) but did not clear it within the
specified time.
Go to
"203.05 Sensor (upper redrive) lag
jam" on page 2-101.
Media remains detected by the sensor
(duplex wait) after power on.
Go to
"230.01 Sensor (duplex wait)
static jam" on page 2-103.
The media is late reaching the sensor
(duplex wait) within the specified time after
the upper redrive motor has turned on for
duplexing.
Go to
"231.03 Sensor (duplex wait) late
jam" on page 2-103.
The media is late reaching the sensor
(registration) within the specified time after
the registration clutch has turned on for
duplex direct mode.
Go to
"232.03 Sensor (registration) late
jam (duplex direct)" on page
Media remains detected by the sensor
(tray 2 feed out) after power on.
Go to
"242.01 Sensor (tray 2 feed out)
static jam" on page 2-107.
The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 3 or tray 4 has started.
Go to
"242.03/242.06 Sensor (tray 2 feed
out) late jam" on page 2-108.
The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 3 or tray 4 has started.
Go to
"242.03/242.06 Sensor (tray 2 feed
out) late jam" on page 2-108.
The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 2 has started.
Go to
"242.56 Sensor (tray 2 feed out)
late jam (80K interval exceeded for feed
rolls)" on page 2-109.
Media remains detected by the sensor
(tray 3 feed out) after power on.
Go to
"243.01 Sensor (tray 3 feed out)
static jam" on page 2-110.
Previous
Next
Go Back
2-106.