Sensor (Hcf Docking Interlock) Removal - Lexmark C950 Service Manual

5058-030
Remove the three screws securing the HCF tray lift gear bracket (D) from the media tray.
6.
7. Remove the HCF tray lift gear bracket (D).
Note: Ensure that all gears rotate smoothly without binding. If necessary, loosen the three screws and adjust
the HCF tray lift gear bracket (D).

Sensor (HCF docking interlock) removal

1. Remove the HCF media tray.
Disconnect the connector from the sensor (HCF unit docking interlock) (A).
2.
Service Manual
4-382
B
D
C
A
Previous
Next
Go Back