Sensor (Upper Media Exit) Static Jam - Lexmark C950 Service Manual

Step Action and questions
Check the sensor (compiler
3
media present) for proper
connection.
Is the above component
properly connected?
Check the finisher PCBA for
4
proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?

485.01 Sensor (upper media exit) static jam

Step Action and questions
Check the media path.
1
Is the media path free of any
media fragments?
Check the sensor (upper media
2
exit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (upper media
exit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Check the sensor (upper media
3
exit) for proper connection.
Is the above component
properly connected?
Check the finisher PCBA for
4
proper connection.
Is the above component
properly connected?
POR the machine.
5
Does the error continue?
Yes
Replace the sensor (compiler
media present).
Go to Step 5.
Replace the finisher PCBA.
Go to
"Finisher PCBA removal"
on page 4-281.
Yes
Go to step 2.
Go to Step 4.
Replace the sensor (upper media
exit).
Go to
"Sensor (upper media
exit) removal" on page 4-336.
Go to Step 5.
Replace the finisher PCBA.
Go to
"Finisher PCBA removal"
on page 4-281.
5058-030
No
Replace connections.
Replace the connections.
Problem resolved
No
Remove any media or media
fragments.
Go to Step 3.
Replace connections.
Replace the connections.
Problem resolved
Diagnostic information
Previous
Next
Go Back
2-191