Lexmark C950 Service Manual page 521

Remove the four photoconductor units.
4.
5. Remove the four toner supplies.
Remove the operator panel front cover.
6.
7. Remove the printhead retract door. See
Remove the inner cover. See
8.
Remove the six screws (A) from the inner plate.
9.
Remove the inner plate.
10.
Re-installation note: When replacing the inner plate, ensure that the posts on the toner augers are properly
aligned with the plate, or the plate cannot be installed.
Re-installation note: When replacing the inner plate, ensure that the plastic gates on each of the toner augers
are pulled out and lowered to their lowest positions, or the plate cannot be installed.
"Printhead retract door removal" on page
"Inner cover removal" on page
A
4-139.
4-3.
Repair information
5058-030
Previous
Next
Go Back
4-93